Move user to own file

configuration.nix

@@ -1,14 +1,13 @@
-# Edit this configuration file to define what should be installed on
-# your system. Help is available in the configuration.nix(5) man page, on
-# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
-
 { config, lib, pkgs, ... }:
 
 {
   imports =
-    [ # Include the results of the hardware scan.
+    [
       ./hardware-configuration.nix
     ];
+
+
+  # Bootloader stuff
   boot.loader.systemd-boot = {
     enable = true;
   };
@@ -17,50 +16,21 @@
   };
 
 
-  # boot.loader.grub.efiSupport = true;
-  # boot.loader.grub.efiInstallAsRemovable = true;
-  # boot.loader.efi.efiSysMountPoint = "/boot/efi";
-  # Define on which hard drive you want to install Grub.
-  # boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
-
+  # Networking stuff
   networking.hostName = "prismo"; # Define your hostname.
-  # Pick only one of the below networking options.
-  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
-  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
-
-  # Set your time zone.
-  time.timeZone = "Europe/Oslo";
-
-  # Configure network proxy if necessary
-  # networking.proxy.default = "http://user:password@proxy:port/";
-  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
   networking.networkmanager.enable = true;
 
-  # Select internationalisation properties.
-  # i18n.defaultLocale = "en_US.UTF-8";
-  # console = {
-  #   font = "Lat2-Terminus16";
-  #   keyMap = "no";
-  #   useXkbConfig = true; # use xkb.options in tty.
-  # };
+  # Set time stuff
+  time.timeZone = "Europe/Oslo";
 
+  # Setup hyprland
+  services.xserver.enable = true;
   programs.hyprland = {
     enable = true;
     xwayland.enable = true;
   };
-  users.users.torjus = {
-    isNormalUser = true;
-    home = "/home/torjus";
-    description = "Torjus";
-    extraGroups = [ "wheel" "networkmanager" ];
-    packages = with pkgs; [
-      firefox
-      vscode
-      go
-      python3
-    ];
-  };
 
+  # Setup common XDG env vars
   environment.sessionVariables = rec {
     XDG_CACHE_HOME = "$HOME/.cache";
     XDG_CONFIG_HOME = "$HOME/.config";
@@ -72,44 +42,16 @@
     ];
   }; 
 
+  # Enable sudo
   security.sudo.enable = true;
-  nixpkgs.config.allowUnfree = true;
-
-  # Enable the X11 windowing system.
-  services.xserver.enable = true;
-
-
-  
-
-  # Configure keymap in X11
-  # services.xserver.xkb.layout = "us";
-  # services.xserver.xkb.options = "eurosign:e,caps:escape";
-
-  # Enable CUPS to print documents.
-  # services.printing.enable = true;
-
-  # Enable sound.
-  # sound.enable = true;
-  # hardware.pulseaudio.enable = true;
-
-  # Enable touchpad support (enabled default in most desktopManager).
-  # services.xserver.libinput.enable = true;
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
-  # users.users.alice = {
-  #   isNormalUser = true;
-  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
-  #   packages = with pkgs; [
-  #     firefox
-  #     tree
-  #   ];
-  # };
 
+  # Enable flakes
   nix.settings.experimental-features = [ "nix-command" "flakes" ];
-  # List packages installed in system profile. To search, run:
-  # $ nix search wget
+  
+  nixpkgs.config.allowUnfree = true;
+  # Install system-wide packages
   environment.systemPackages = with pkgs; [
-    vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+    vim
     wget
     curl
     neovim
@@ -118,42 +60,6 @@
     git
   ];
 
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  # programs.mtr.enable = true;
-  # programs.gnupg.agent = {
-  #   enable = true;
-  #   enableSSHSupport = true;
-  # };
-
-  # List services that you want to enable:
-
-  # Enable the OpenSSH daemon.
-  # services.openssh.enable = true;
-
-  # Open ports in the firewall.
-  # networking.firewall.allowedTCPPorts = [ ... ];
-  # networking.firewall.allowedUDPPorts = [ ... ];
-  # Or disable the firewall altogether.
-  # networking.firewall.enable = false;
-
-  # Copy the NixOS configuration file and link it from the resulting system
-  # (/run/current-system/configuration.nix). This is useful in case you
-  # accidentally delete configuration.nix.
-  # system.copySystemConfiguration = true;
-
-  # This option defines the first version of NixOS you have installed on this particular machine,
-  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
-  #
-  # Most users should NEVER change this value after the initial install, for any reason,
-  # even if you've upgraded your system to a new NixOS release.
-  #
-  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
-  # so changing it will NOT upgrade your system.
-  #
-  # This value being lower than the current NixOS release does NOT mean your system is
-  # out of date, out of support, or vulnerable.
-  #
   # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
   # and migrated your data accordingly.
   #

flake.nix

@@ -13,6 +13,7 @@
         ./configuration.nix
         ./podman.nix
         ./fonts.nix
+        ./users.nix
       ];
     };
   };

users.nix

@@ -0,0 +1,33 @@
+{ pkgs, ...}: 
+
+{
+  # Setup torjus user
+  users.users.torjus = {
+    isNormalUser = true;
+    home = "/home/torjus";
+    description = "Torjus";
+    extraGroups = [ "wheel" "networkmanager" ];
+    # Install some user packages
+    packages = with pkgs; [
+      # Browser
+      firefox
+
+      # Editors
+      vscode
+
+      # Python stuff
+      python3
+      ruff
+      poetry
+
+      # Go stuff
+      go
+      delve
+      gopls
+      
+      # Generic dev stuff
+      tokei
+      ripgrep
+    ];
+  };
+}